Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Mito
    4. : How to replace the resistor of the electric fan of an Alfa Romeo Mito

Alfa Romeo Mito - Video tutorial

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Electric fan
Operation: How to replace the resistor of the electric fan of an Alfa Romeo Mito

Before we can start, we will have to go and open the front hood of our Alfa Romeo Mito. The resistor of the radiator electro-fan is located below the coolant expansion tank. So let's start by unhooking and disconnecting the relative electrical connector. After that, we will have to unscrew and remove the fixing bolt, using an 8 wrench. By doing so, we will have freed the resistor of the radiator fan. We then proceed by going to extract the resistance from its housing, and we will have finished the disassembly. To mount the new resistance, all we have to do is follow these steps in reverse, and we will have completed the replacement.


Posted on 27 January 2024 by ScegliAuto



Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to locate the precise locations of the fuses on your Alfa Romeo Mi
How to remove the passenger compartment fan of an Alfa Romeo MiTo
Alfa Romeo Mito (2008-2018 / MK 1) Before we can start, we will have to go and sit in the front passenger seat of our Alfa Romeo MiTo. So let's start by disengaging and removing the lo
How to remove the passenger compartment ventilation fan on Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In this video we see how to remove the passenger compartment ventilation fan on Alfa Romeo Mito. With a plastic lever, remove the plastic covering of

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos