Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 159
    4. : How to replace the front wheel bearing in the Alfa Romeo 159?

Alfa Romeo 159 - Video tutorial

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Bearing
Operation: How to replace the front wheel bearing in the Alfa Romeo 159?

In this tutorial, we can see how to replace the front wheel bearing in the Alfa Romeo 159, a simple operation if you have good manual skills. First, we lift the side where we will be working, then we remove the wheel, unscrew the large central nut, and remove the brake caliper. We then remove the disc, unscrew the lower hub bolt, and once separated, we extract the driveshaft. At this point, we can unscrew the fixing bolts of the bearing, remove it, and insert the replacement. To reassemble everything, just follow the reverse procedure.


Posted on 13 March 2024 by ScegliAuto



How to remove the front bumper in Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) In today's video we see how to remove the front bumper of the Alfa Romeo 159. This tutorial also applies to the other two coeval models Brera and Spi
How to remove the starter motor of an Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) Before being able to start, we will have to go and open the front hood of our Alfa Romeo 159. Let's start then by disassembling and removing the slee
Where is the fuse box of the Alfa Romeo 159 located?
Alfa Romeo 159 (2005-2011 / MK 1) If you still don't know where the fuse box of your Alfa Romeo 159 is located, you just need to carefully read the following mini guide and put into p

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos