Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Alfa Romeo
  4. :
  5. 159
  6. : How to change the oil filter of the Alfa Romeo 159 2.0 JTDM

Alfa Romeo 159 - Video tutorial

Model: Alfa Romeo 159 MK 1 - Years 2005-2011
Part: Oil filter
Operation: How to change the oil filter of the Alfa Romeo 159 2.0 JTDM

In this video we see how to change the oil filter of an Alfa Romeo 159 JTDM; in the frame that the youtuber shows us, we can locate it in the red circle that highlights it. We will have to remove it with a specific wrench, of which the size is also indicated, which is 32 mm. Naturally, being full of oil, when we remove it we must be careful to place a basin underneath that can collect the used oil, which we do not want to disperse in the environment; we will dispose of it later - together with the oil collected from the sump - at an authorized center. When we put the filter back, we also put the new o-ring that is part of the package and do not forget to lubricate it with a little clean oil. Let's put it back in its place and the job is done.


Posted on 22 April 2024 by ScegliAuto



Replace the diesel filter on Alfa Romeo 159 - Brera JTDM
Alfa Romeo 159 (2005-2011 / MK 1) Today we will see, in this video tutorial, how to remove and replace the diesel filter on an Alfa Romeo 159, but also on the Brera, with a JTDM Diese
Reset oil warning light Alfa Romeo 159 1.9 JTDM
Alfa Romeo 159 (2005-2011 / MK 1) In this video tutorial we will see how to reset the engine oil warning light of the routine maintenance of an Alfa Romeo 159 1.9 JTDM. First of all,
How to change the crankshaft rpm sensor of the Alfa Romeo 159 JTDM
Alfa Romeo 159 (2005-2011 / MK 1) Let's see in this guide how to remove and replace the crankshaft speed sensor of the Alfa Romeo 159, with JTDM engine, following these simple and qui

    Frequently Asked Questions

    • 159 2005-2011 - Where is the oil filter of an Alfa Romeo 159 1.9 jtdm located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos