Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Alfa Romeo Stelvio
    4. : How to remove the door panel of an Alfa Stelvio

Alfa Romeo Alfa Romeo Stelvio - Video tutorial

Model: Alfa Romeo Alfa Romeo Stelvio MK 1 - Years 2016-2024
Part: Door panel
Operation: How to remove the door panel of an Alfa Stelvio

The removal of the door panel of an Alfa Romeo Stelvio is a very simple operation that you can do on your own, thanks to the help of our video tutorial. The first step is to open the door and start removing the door trim and mat using a plastic lever. The second step is to remove all the screws holding the panel. Once removed, we extract the window switch panel with a plastic lever, disconnecting the connector. The third step is to remove the side screws and the screw under the window switch panel in order to remove the entire panel. Finally, we disconnect the connectors.


Posted on 19 May 2024 by ScegliAuto



Disassembly of the front door panel of the Alfa Romeo Stelvio.
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) In this guide, we will see instructions on how to disassemble and replace the front door panel of the Alfa Romeo Stelvio. First, we open the front do
How to remove the Alfa Romeo Stelvio door panel
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) How to remove the front door panel of an Alfa Romeo Stelvio? We disconnect the battery terminals located in the engine compartment, with a screwdrive
Removing the Alfa Romeo Stelvio door panel
Alfa Romeo Alfa Romeo Stelvio (2016-2024 / MK 1) In this video tutorial we will see how to remove the Alfa Romeo Stelvio door panel. First we open the door and with a screwdriver remove the plastic

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos