Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Aprilia
    3. :
  3. Sr 125
    4. : How to change the engine oil of an Aprilia SR 125?

Model: Aprilia Sr 125
Part: Engine oil
How to change the engine oil of an Aprilia SR 125?

To change the engine oil of your Benelli 302R, place the motorcycle on a flat surface. Remove the drain plug to drain the used oil. Once the oil is completely drained, replace and tighten the drain plug securely. Then, fill the engine with new engine oil through the fill plug, using the recommended oil for your motorcycle model and checking the level with the oil dipstick according to the manufacturer's specifications. Make sure not to exceed the maximum fill level. Start the engine to circulate the oil, then check the level again and add oil if necessary. Dispose of the used oil safely.


Posted on 25 April 2024 by ScegliAuto



How to change the Aprilia SR 125 engine oil
Sr 125 Let's find out the guide on how to carry out the routine maintenance service, replacing the engine oil and oil filter, of the Aprilia SR 125 scooter.
How to replace the air filter on the Aprilia SR 125 scooter?
Sr 125 In this tutorial, we can see how to replace the air filter on the Aprilia SR 125 scooter, an extremely simple and fast operation. First of all, we wa
How do you set the clock on the Aprilia SR 125?
Sr 125 In order to set the clock of the Aprilia SR 125, you need to turn on the instrument panel by turning the key in the ignition switch: once the panel i

How do you replace the headlight bulb of the Triumph Daytona 675R?

In order to replace the headlight bulb of the Triumph Daytona 675R, you need to loosen the screws that secure the appropriate protective panels inside the bulbs: these will be immediately below the handlebars, on the sides of the front fork. Once these covering panels have been removed, it will be possible to disconnect the connector connected to the bulb, removing it from its housing; at this point, it will be possible to connect the new bulb to the connector, inserting it into the headlight and verifying that everything works correctly.

Watch the video!


by ScegliAuto

More videos