Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Aprilia
    3. : Scarabeo 400

Aprilia Scarabeo 400 - Videoguide

Aprilia Scarabeo 400
How to replace the ECU of the Aprilia Scarabeo
Below we will see the instructions that will allow us to disassemble and replace the ECU of the Aprilia Scarabeo 400 scooter. First, we put our scooter on the …read all…
Posted on 4 March 2024 by ScegliAuto
Aprilia Scarabeo 400
How to replace the front fork oil of the Aprilia Scarabeo 400.
Today we will see step-by-step instructions on how to disassemble the forks and replace the oil of the Aprilia Scarabeo 400 scooter. First of all, we put the …read all…
Posted on 23 December 2023 by ScegliAuto
Aprilia Scarabeo 400
How to replace the coolant liquid of the Aprilia Scarabeo 400.
Today's guide will show us how to replace the coolant of the Aprilia Scarabeo 400 scooter, in simple and quick steps. First, we put the scooter on the center …read all…
Posted on 17 December 2023 by ScegliAuto
Aprilia Scarabeo 400
How do you replace the transmission of the Aprilia Scarabeo 400?
In order to replace the transmission of the Aprilia Scarabeo 400, you need to loosen the screws that secure the cover of the crankcase located on the left side …read all…
Posted on 13 September 2023 by ScegliAuto
Aprilia Scarabeo 400
How to replace the oil filter on the Aprilia Scarabeo 400 scooter?
In this tutorial, we can see how to replace the oil filter on the Aprilia Scarabeo 400 scooter, a very simple operation that must be carried out together with …read all…
Posted on 22 May 2023 by ScegliAuto
Aprilia Scarabeo 400
How do you replace the rear brake pads on the Aprilia Scarabeo 400?
To replace the rear brake pads of the Aprilia Scarabeo 400, you need to loosen the central nut that fixes the rear wheel to the corresponding swingarm, so that …read all…
Posted on 12 May 2023 by ScegliAuto
Aprilia Scarabeo 400
How to replace the oil in the gearbox of Aprilia Scarabeo 400
Today's guide will show us how to replace the gearbox oil of the Aprilia Scarabeo 400 scooter. First, we put the scooter on the center stand and start …read all…
Posted on 7 April 2023 by ScegliAuto
Aprilia Scarabeo 400
How do you replace the front brake pads on an Aprilia Scarabeo?
In order to replace the front brake pads on the Aprilia Scarabeo 400, you need to loosen the bolts that fix the front brake caliper, connected to the relative …read all…
Posted on 15 May 2023 by ScegliAuto
Aprilia Scarabeo 400
How do you replace the spark plug on the Aprilia Scarabeo 400?
In order to replace the spark plug on the Aprilia Scarabeo 400, you need to open the compartment under the saddle, so that you can access the screws that …read all…
Posted on 12 November 2022 by ScegliAuto
Aprilia Scarabeo 400
How to replace the battery of the Aprilia Scarabeo 400?
In order to replace the battery of the Aprilia Scarabeo 400 you have to open the compartment under the saddle, so that you can access the plastic cover …read all…
Posted on 27 August 2022 by ScegliAuto
Aprilia Scarabeo 400
How to replace the headlight bulb on Aprilia Scarabeo 400
The guide shows how to replace the front light bulb of the Aprilia Scarabeo 400 scooter. After securing the vehicle with a Phillips screwdriver, unscrew the …read all…
Posted on 18 June 2022 by ScegliAuto
Aprilia Scarabeo 400
How to replace the air filter on Aprilia Scarabeo 400?
In order to replace the Aprilia Scarabeo 400 air filter, loosen the screws that secure the casing that contains the air filter, positioned on the left side of …read all…
Posted on 28 May 2024 by ScegliAuto
Battery (1) Spark plugs (1) Control unit (1) Headlight (1) Air filter (1) Oil filter (1) (1) Antifreeze liquid (1) Gear oil (1) Brake pads (2) Transmission (1)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos