Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Aprilia
    3. : Scarabeo 500

Aprilia Scarabeo 500 - Videoguide

Aprilia Scarabeo 500
How to remove the handlebar cover and windshield of the Aprilia Scarabeo 500.
In this guide, we will see how to disassemble and replace the plastic fairing of the handlebars and the windshield of the Aprilia Scarabeo 500 scooter. First, …read all…
Posted on 14 August 2023 by ScegliAuto
Aprilia Scarabeo 500
How do you replace the handlebars of the Aprilia Scarabeo 500?
To replace the handles of the Aprilia Scarabeo 500, you need to loosen the nuts located at the ends of the handlebar, corresponding to the counterweights. When …read all…
Posted on 2 June 2023 by ScegliAuto
Aprilia Scarabeo 500
How do you reset the Aprilia Scarabeo 500 Service light?
The Service warning light on the Aprilia Scarabeo 500 is reset by holding down the MODE button located on the left grip of the motorcycle: while the button is …read all…
Posted on 30 May 2023 by ScegliAuto
Aprilia Scarabeo 500
How do you reset the Service warning light on the Aprilia Scarabeo 500?
In order to reset the Aprilia Scarabeo 500 Service warning light, press and hold the MODE button which is located in correspondence with the left knob of the …read all…
Posted on 28 October 2022 by ScegliAuto
Aprilia Scarabeo 500
How to change the engine oil and the oil filter on the Aprilia Scarabeo 500
Let's find out in this guide the steps that will allow us to carry out the routine maintenance service, replacing the engine oil and oil filter, of the Aprilia …read all…
Posted on 8 September 2022 by ScegliAuto
Aprilia Scarabeo 500
How to replace the belt on the Aprilia Scarabeo 500?
The belt replacement operation on the Aprilia Scarabeo is carried out by loosening the bolts that secure the casing at the rear wheel of the motorcycle, on the …read all…
Posted on 4 May 2024 by ScegliAuto
(1) (1) Checks and maintenance (2) (1) Engine oil (1)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos