Do it yourself
| ||||
|
Audi A6 - Video tutorial
Model: Audi A6
MK 2, C5
- Years 1997-2004 For this operation it is necessary to obtain the lamp conversion kit. Open the bonnet and remove the air box to access the headlight assembly screws. Disassemble the whole group. Remove the protection, remove the bulb holder, remove the spring and the bulb from the headlight. With pliers, bend the terminals of the lamp holding spring. Open the package of the new lamp by removing the packaging and absolutely without touching the glass bulb with your hands put the lamp in the headlight paying attention to the reference notches, the lamp must be mounted precisely and in the right direction. Close the retaining spring and slide the lamp holder onto the lamp connector. Put the metal protection back on, close it and check for correct operation.
Posted on 9 July 2023 by ScegliAuto
How to install the xenon headlight kit
Audi A6 (2004-2012 / C6, MK 3) The video guide shows the assembly of a kit for xenon headlights compatible with the canbus system, to avoid the signaling of anomalies by the car co
Accessory kit, beverage holder installation
Audi A6 (1997-2004 / MK 2, C5) Using a small fixed screwdriver, unclip the frame around the drink holders and the button of the parking arrows. At this point, intercept the fasteni
Change automobile distribution kit
Audi A6 (1997-2004 / MK 2, C5) To have access to the car's distribution kit, the car must be removed and the wheel raised. It is essential to remove the accessory belt, depositing Other guides that may interest you |
How to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.033
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |