Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Benelli Bn 302 - Videoguide

Benelli Bn 302
How to perform maintenance on the Benelli BN 302?
Let's briefly learn how to perform the routine maintenance of the Benelli BN 302 motorcycle, replacing the engine oil and oil filter. First, let's put our …read all…
Posted on 7 August 2023 by ScegliAuto
Benelli Bn 302
How do you replace the brake pads on the Benelli BN 302?
In order to replace the brake pads on the Benelli BN 302, the same operation must be performed both for the front and rear ones. It will be necessary to …read all…
Posted on 29 December 2022 by ScegliAuto
Benelli Bn 302
How do you replace the Benelli BN 302 license plate holder?
In order to replace the Benelli BN 302 license plate holder, you need to loosen the bolts that fix it to its housing: these bolts will be accessible by lifting …read all…
Posted on 27 November 2022 by ScegliAuto
Benelli Bn 302
How do you replace the spark plugs of the Benelli BN 302?
In order to replace the spark plugs on the Benelli BN 302, loosen the bolts that secure the side panels on the front side of the bike, in correspondence with …read all…
Posted on 12 May 2024 by ScegliAuto
Benelli Bn 302
How do you replace the muffler of the Benelli BN 302?
In order to replace the muffler of the Benelli BN 302 you have to loosen the bolts that secure the side panels in the lower side of the bike, in order to …read all…
Posted on 18 April 2024 by ScegliAuto
Benelli Bn 302
How to do the service (oil change) on the Benelli BN 302
Let's find out in this guide the procedure on how to carry out the maintenance service of the oil change of the Benelli BN 302 motorcycle. engine, using a …read all…
Posted on 13 April 2024 by ScegliAuto
Benelli Bn 302
Service on Benelli Bn 302
It is recommended to use 15W-50 oil. Run the engine for a few minutes in order to heat the oil which will become more liquid and the casting will be faster. …read all…
Posted on 8 January 2024 by ScegliAuto
Benelli Bn 302
Benelli BN 302 headlight bulb replacement
Today we will see how to remove and replace the headlight bulb of a Benelli BN 302. First of all we go to unscrew the torx screws that we find under the …read all…
Posted on 7 January 2024 by ScegliAuto
Benelli Bn 302
Replacement of the h7 led bulb with xenon in the Benelli Bn 302 headlight
As with any maintenance operation, we arrange the bike in a stable and safe position so that we can work on it. Once this is done, we remove the plastic mask …read all…
Posted on 20 November 2023 by ScegliAuto
Benelli Bn 302
How to replace the mirror of a Benelli Bn 302 motorcycle
How to replace the mirror of a Benelli Bn 302 motorcycle? We unscrew the locking pin with a suitable fixed key. Once the locking pin has been loosened, unscrew …read all…
Posted on 10 November 2023 by ScegliAuto
Spark plugs (1) Headlight bulb (2) Muffler (1) Engine oil (3) Brake pads (1) (1) (1)

See also:

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos