Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Benelli
    3. :
  3. Tnt 250
    4. : How to replace the engine air filter on Benelli TNT 250

Model: Benelli Tnt 250
Part: Air filter
How to replace the engine air filter on Benelli TNT 250

Let's see in this guide the instructions that will allow us to disassemble and replace the engine air filter of the Benelli TNT 250. First we put the stand on our motorcycle and we begin to remove the passenger seat and then the driver's seat, unscrewing the fixing screws; after which we remove the air filter cover to extract the cartridge, as shown in the video. To this we replace the air filter with the new one, of the right type, inserting it in the correct direction; then reassemble the filter box, following the video to the end!


Posted on 20 May 2024 by ScegliAuto



How do you replace the air filter on the Benelli TnT 250?
Tnt 250 The air filter replacement operation on the Benelli TnT 250 is carried out by loosening the screws which fix the saddle to its housing: once the sadd
Change the engine oil and oil filter on Benelli TNT 250
Tnt 250 Let's see how to carry out the routine maintenance service, replacing the engine oil and the oil filter, on a Benelli Tnt 250 motorcycle. First of al
How do you replace the engine oil of the Benelli TnT 250?
Tnt 250 The procedure for replacing the motor oil on the Beneli TnT 250 involves loosening the drain plug on the oil pan, located on the bottom of the vehicl

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos