Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Benelli
    3. :
  3. Trk 502
    4. : How do you replace the exhaust of the Benelli TRK 502X?

Model: Benelli Trk 502
Part: Muffler
How do you replace the exhaust of the Benelli TRK 502X?

In order to replace the exhaust of the Benelli TRK 502X, you need to loosen the screws that fix the exhaust terminal to its housing, located on the right side of the motorcycle just below the fender: once the support screws are loosened, you will need to widen the ring that connects the terminal to the exhaust manifold. This way, you can remove the old exhaust from its seat and insert the new one: the new exhaust must be fixed to its supports with screws and connected to the manifold with the appropriate ring that was just removed.


Posted on 1 May 2024 by ScegliAuto



How do you replace the muffler of the Benelli TRK 502X?
Trk 502 In order to replace the exhaust pipe of the Benelli TRK 502X, you need to loosen the screws that fix the exhaust terminal to its housing: this can be
How do you replace the clutch of the Benelli TRK 502X?
Trk 502 In order to replace the clutch of the Benelli TRK 502X, you need to loosen the bolts that fix the casing located on the right side of the bike, so th
How do you replace the chain on the Benelli TRK 502X?
Trk 502 Replacing the chain of the Benelli TRK 502X is done by removing the plastic panel that covers the sprocket on the left side of the bike. Once this pa

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos