Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Bentley
    3. :
  3. Continental GT
    4. : How do you replace the engine oil of the Bentley Continental GT?

Bentley Continental GT - Video tutorial

Model: Bentley Continental GT MK 1 - Years 2003-2011
Part: Engine oil
Operation: How do you replace the engine oil of the Bentley Continental GT?

In order to replace the engine oil of the Bentley Continental GT, you need to loosen the drain plug of the oil pan, which is located at the bottom of the engine compartment: here you can position a container so that all the used oil is completely drained. Then, you can close the plug and subsequently remove the oil filter in the area below, inserting the new replacement part. After installation, you can open the hood to access the top of the engine block and add the necessary amount of oil through the respective vent.


Posted on 18 July 2023 by ScegliAuto



How do you replace the cabin filter of the Bentley Continental GT?
Bentley Continental GT (2018-2024 / MK 3) In order to replace the cabin filter of the Bentley Continental GT, you need to lift the hood so that you can access the upper inside part: here you
How do you remove the front headlight of the Bentley Continental GT?
Bentley Continental GT (2018-2024 / MK 3) In order to replace the front headlight of the Bentley Continental GT, you need to loosen the screws that fix the front bumper of the car to its hous
How to replace the cabin filter of the Bentley Continental GT.
Bentley Continental GT (2018-2024 / MK 3) If you want to replace the cabin air filter on your Bentley Continental GT (year 2018-2023) by yourself, it will be sufficient to carefully read the

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos