Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Beta
    3. :
  3. Rr 125
    4. : How do you replace the engine oil of the Beta RR 125?

Model: Beta Rr 125
Part: Engine oil
How do you replace the engine oil of the Beta RR 125?

The procedure for replacing the engine oil on the Beta RR 125 is carried out by loosening the drain plug located in the central lower part of the motorcycle: once this has been removed, all the used oil can be collected in a properly positioned container. After the oil has completely drained out, the oil filter next to the drain plug can also be removed, in order to replace it with a new spare part. Now it will be possible to top up the oil, by adding the necessary amount of oil through the hole on the right side of the motorcycle's crankcase.


Posted on 16 April 2024 by ScegliAuto



Change the Beta RR 125 engine oil and oil filter
Rr 125 In today's video tutorial we will see how to carry out the routine maintenance coupon, replacing the engine oil and the oil filter, of the Beta RR 12
How do you replace the engine oil of the Beta RR 125?
Rr 125 In order to replace the engine oil of the Beta RR 125, you need to loosen the drain plug located in the central lower part of the motorcycle. Once th
How to turn on a Beta RR 125
Rr 125 We begin by going to sit on the driver's seat of our Beta RR 125. After that, we will have to insert the key in the ignition, then turn it, thus acti

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos