Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X3
    4. : How do you replace the rear differential oil on a BMW X3?

BMW X3 - Video tutorial

Model: BMW X3 MK 1, E83 - Years 2003-2010
Part: Differential
Operation: How do you replace the rear differential oil on a BMW X3?

In order to replace the oil in the rear differential of the BMW X3, you need to access the lower part of the car: the differential will obviously be located in correspondence with the central part of the rear axle shaft. By locating the oil drain plug, it will be possible to unscrew it in order to let all the used oil flow into a suitably positioned container; when all the oil has completely drained out, it will be possible to top up from the same breather. It will be necessary to have a plunger to insert the oil inside the differential.


Posted on 11 December 2022 by ScegliAuto



How do you change the transfer case oil on the BMW X3?
BMW X3 (2010-2017 / F25, MK 2) In order to change the oil in the transfer case of the BMW X3, you have to go to the lower part of the car, at the rear axle: here there will be the
How do you replace the transmission oil in the BMW X3?
BMW X3 (2010-2017 / F25, MK 2) In order to replace the gearbox oil of the BMW X3, it is necessary to access the underside of the car so that the screws securing the protective plat
How to replace the engine oil and oil filter of the BMW X3.
BMW X3 (2017-2024 / MK 3, G01) To perform the routine maintenance, simply follow this simple guide; let's see how to replace the engine oil and oil filter of the BMW X3. First, lif

    Frequently Asked Questions

    • X3 2010-2017 - What problems does the BMW X3 differential have? Read Answer
    • X3 2010-2017 - What does the 4x4 light on in the BMW X3 mean? Read Answer
    • X3 2003-2010 - Why does the 4x4 warning light come on on the BMW X3? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos