Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to replace the windshield gasket on a BMW 3 Series?

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E90, E91, E92 - Years 2005-2013
Part: Windshield
Operation: How to replace the windshield gasket on a BMW 3 Series?

In this tutorial, we can see how to replace the windshield gasket on a BMW 3 Series, an extremely simple and fast operation. First of all, we position ourselves in front of the windshield itself, then we grip the old gasket with pliers and pull it outwards. If necessary, for example in the case where it is particularly old, we remove any internal residue using a screwdriver with a flat tip. Once this is done, we position the replacement and press it firmly towards the windshield, making sure that there is no space left at the two ends.


Posted on 27 May 2023 by ScegliAuto



How to remove and install the windshield seal on a BMW 3 Series
BMW Serie 3 (2005-2013 / E90, E91, E92) How to remove and install the windshield seal on a BMW 3 Series? Don't worry, let's see how to proceed with the removal together. Let's start the dis
How do you replace the windshield seal on the BMW 3 Series?
BMW Serie 3 (2005-2013 / E90, E91, E92) In order to replace the windshield gasket, you have to pry an object at the bottom of the gasket so that it can be detached from the bodywork. Once t
BMW 3 Series windshield replacement
BMW Serie 3 (2005-2013 / E90, E91, E92) Let's see below the instructions necessary to disassemble and replace the windshield of the BMW 3 Series. First of all, we open the bonnet and begin

    Frequently Asked Questions

    • Serie 3 2012-2019 - What is the price of the BMW 3 Series windshield? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos