Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : How to remove the rear seats in the BMW 3 Series?

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 F31, F30 - Years 2012-2019
Part: Rear bench seat
Operation: How to remove the rear seats in the BMW 3 Series?

In this tutorial, we can see how to remove the rear seats in the BMW 3 Series, an extremely simple and fast operation. First of all, we open both rear doors, then we remove the side covers, lower the backrests, and unscrew the corresponding fixing bolts with a Torx T50 key. We then extract the backrests themselves from the cabin, grab the seat and detach it from the base. At this point, all that remains is to unscrew the fixing bolts of the seat belts, position the replacements, and follow the exact reverse procedure to reassemble everything.


Posted on 18 January 2024 by ScegliAuto



How to remove the rear seats of the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Let's see together the main instructions that will allow us to disassemble and replace the rear seats of the BMW 3 Series. First we open the rear doo
How to fold down rear seats on BMW 3 Series
BMW Serie 3 (2005-2013 / E90, E91, E92) In this guide, let's briefly see the steps that will allow us to lower the rear seats of the BMW 3 Series, increasing the volume of the trunk, by fol
How To Fold The Rear Seats On BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Hello everyone! Today we show you how to fold the rear seat backrests on BMW 3 Series e46. This is a very simple operation, yet many do not know it a

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos