Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : Why did the radiator fan of the BMW 3 Series stop working?

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E90, E91, E92 - Years 2005-2013
Part: Radiator
Operation: Why did the radiator fan of the BMW 3 Series stop working?

If the radiator fan of our BMW 3 Series has suddenly stopped working, the first thing we can do is check the status of the respective fuse, whose location is indicated in this video. As shown, the fuse in question is located in the box inside the cabin, behind the passenger glove compartment, and is the fifth in the bottom row. If it is faulty, make sure to replace it with a replacement with the same characteristics, namely 60A, and always operate with the vehicle turned off, otherwise we could cause serious damage to the fan itself.


Posted on 25 April 2024 by ScegliAuto



Removing the radiator fan.
BMW Serie 3 (1998-2006 / E46) Open the engine compartment hood and locate the position of the radiator fan which is on the front just behind the radiator itself. Using two suitabl
Removing the radiator fan of a BMW 3 series
BMW Serie 3 (2005-2013 / E90, E91, E92) We replace the damaged radiator fan on a BMW 3 series. We open the car door, pull up the engine compartment opening lever at the bottom left of the d
Replacement fan switch on BMW 3 Series
BMW Serie 3 (2005-2013 / E90, E91, E92) Today we show you where the switch connected to the radiator fan is located on BMW 3 Series E90. To get to it you will have a long job to do, as you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos