Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : Replacement of the speakers of the BMW 3 Series

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Loudspeaker
Operation: Replacement of the speakers of the BMW 3 Series

Today's guide will show us how to disassemble and replace all the speakers of the BMW 3 Series, following the instructions below. First, we get on board the car and start by disassembling and removing the rear speakers; to do this, we remove the grille and unscrew the fixing screws, finally disconnecting the electrical connector. At this point, we disassemble the door panel to access the other speaker; in the same way, we will remove and replace the speaker with the new one, then reassemble the grille and finally the front door panel!


Posted on 4 May 2024 by ScegliAuto



How do you replace the rear speakers of the BMW 3 Series?
BMW Serie 3 (2005-2013 / E90, E91, E92) In order to replace the rear speakers of the BMW 3 Series, located in the rear shelf, it will be necessary to completely lift the headrests of the re
How to replace the front speakers in the BMW 3 Series?
BMW Serie 3 (2005-2013 / E90, E91, E92) In this tutorial, we can see how to replace the front speakers in the BMW 3 Series, a very simple and quick operation. First of all, make sure that t
How to replace the speakers of the BMW 3 Series.
BMW Serie 3 (2005-2013 / E90, E91, E92) Below we will see how to disassemble and replace the speakers of the BMW 3 Series, following the instructions below. First, we open the front door an

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos