Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X3
    4. : How do you replace the gearbox of the BMW X3?

BMW X3 - Video tutorial

Model: BMW X3 MK 1, E83 - Years 2003-2010
Part: Gearbox
Operation: How do you replace the gearbox of the BMW X3?

In order to replace the gearbox of the BMW X3, you need to lift the car using a jack or a lift, so that you can have access to the components located in its lower part: once the vehicle has been lifted, you can proceed by loosening the screws that secure the gearbox to its housing at the rear of the engine block. This gearbox must also be released from the appropriate connectors related to the sensors; the new gearbox can now be inserted into its seat, connected and fixed properly.


Posted on 17 May 2024 by ScegliAuto



Disassembly of the gearbox of the BMW X3
BMW X3 (2003-2010 / MK 1, E83) Let's see in this guide the main steps that will allow us to disassemble the gearbox of the BMW X3. First of all we lift the car and start by disconn
How to unlock the gearbox of the BMW X3 of 2016?
BMW X3 (2010-2017 / F25, MK 2) In cars with automatic transmission it happens all too often that it gets stuck in position P (park) and the BMW X3 is certainly no exception to this
How do you replace the transmission oil in the BMW X3?
BMW X3 (2010-2017 / F25, MK 2) In order to replace the gearbox oil of the BMW X3, it is necessary to access the underside of the car so that the screws securing the protective plat

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos