Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. Serie 3
  6. : Installation of snow chains for non-driveable wheels

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E90, E91, E92 - Years 2005-2013
Part: Snow chains
Operation: Installation of snow chains for non-driveable wheels

Obtain snow chains suitable for the type of tire installed on the car. Quick-fit snow chains are ideal for situations where you need to put them on and take them off frequently. To assemble, open the first chain so that it can be positioned on the drive wheel so that it adheres over the entire surface. Using the special tool, begin to tighten slightly, then move the car so that the chain adheres completely to the wheel and then tighten the chain completely. During the trip it is advisable to periodically check the tension of the chains.


Posted on 25 June 2023 by ScegliAuto



How to install the towbar on BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) The installation of the tow hook must necessarily be carried out at an authorized workshop since, together with the certificate of conformity of the
How to adjust the handbrake of the BMW X3
BMW Serie 3 (2005-2013 / E90, E91, E92) To adjust the handbrake of your car it will be necessary to identify where the limit switch mechanism of the handbrake cable is positioned, to reach
Brake hose replacement instructions
BMW Serie 3 (1998-2006 / E46) In vehicles that travel on snow-covered roads on which salt is sprinkled during the winter, it is likely that corrosion phenomena can be triggered th

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos