Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. Cts
    4. : How to replace the battery of the key for the Cadillac CTS 2019.

Cadillac Cts - Video tutorial

Model: Cadillac Cts MK 3 - Years 2014-2019
Part: Key
Operation: How to replace the battery of the key for the Cadillac CTS 2019.

When the remote control of your third-generation Cadillac CTS (2019) stops working due to a drained battery, you just need to follow the following procedure to replace it correctly and in a few seconds. First of all, remove the emergency key by pressing the dedicated button, then use a flathead screwdriver to remove the remote control cover. At this point, locate the existing battery and replace it with a new one (CR 2032). Finally, all you have to do is reassemble the cover and insert the physical emergency key inside.


Posted on 10 October 2023 by ScegliAuto



How to replace the battery in the remote control of the Cadillac CTS?
Cadillac Cts (2014-2019 / MK 3) In this tutorial we can see how to replace the Cadillac CTS remote control battery, a very simple and fast operation. To do this, we will need a repl
How to replace the key battery of the Cadillac CTS
Cadillac Cts (2002-2007 / MK 1) Thanks to its rather simple and minimalistic structure, the replacement of the battery of the Cadillac CTS key turns out to be rather simple and quic
How to replace the battery in the remote control of the Cadillac CTS?
Cadillac Cts (2008-2014 / MK 2) In this tutorial we can see how to replace the Cadillac CTS remote control battery. For this quick and easy operation, we will only need a CR2032 rep

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos