Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Silverado
    4. : How to replace the front manufacturer emblem of the Chevrolet Silverado

Chevrolet Silverado - Video tutorial

Model: Chevrolet Silverado MK 2 - Years 2007-2014
Part: Manufacturer's coat of arms
Operation: How to replace the front manufacturer emblem of the Chevrolet Silverado

Today we will discover the instructions that will allow us to disassemble and replace the manufacturer's emblem on the front bumper of the Chevrolet Silverado. First, we open the hood of the car and begin to disassemble and remove the bumper grille, removing all the plastic clips we find on the top; once removed, we can detach the manufacturer's emblem from the inside, as shown in the video. At this point, we install the new emblem on the bumper grille, making sure that the hooks are in good condition, following the video tutorial until the end!


Posted on 4 May 2024 by ScegliAuto



Where are the fuses located for the Chevrolet Silverado 2?
Chevrolet Silverado (2007-2014 / MK 2) Knowing the location of the fuses in your Chevrolet Silverado Mk2 is very important as it allows you to intervene in a targeted and safe manner in ca
How to replace the front logo of the Chevrolet Silverado
Chevrolet Silverado (2014-2018 / MK 3) In this video we will see a more than functional aesthetic change on the Chevrolet Silverado, an American pick-up. We will in fact replace the front
How to replace the air filter of the Chevrolet Silverado 2.
Chevrolet Silverado (2007-2014 / MK 2) In this new mini guide dedicated to your Chevrolet Silverado Mk2 (year 2007-2014), we will discover the steps you need to take to correctly replace t

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos