Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Spark
    4. : How to replace the external handle of the Chevrolet Spark

Chevrolet Spark - Video tutorial

Model: Chevrolet Spark M300, MK 1 - Years 2009-2016
Part: Handle
Operation: How to replace the external handle of the Chevrolet Spark

The steps to replace the external handle of the Chevrolet Spark or Matiz are as follows: The first step is to detach the door panel, to do this we need to remove the window crank handle and then unscrew the panel screws. Remove it and move on to the next step. The second step is to remove the protection located under the plastic panel. The third step is to unscrew the internal screw of the handle. The fourth step is to disassemble the handle from the outside. To install the new handle we must: Insert the new handle. Screw in the screw and cover the panel before reassembling it.


Posted on 19 May 2024 by ScegliAuto



How do you replace the external rearview mirror of the Chevrolet Spark?
Chevrolet Spark (2009-2016 / M300, MK 1) In order to replace the external rearview mirror of the Chevrolet Spark, you need to detach the plastic cover on the inside of the door, where the mi
Removing the Chevrolet Spark rear door panel
Chevrolet Spark (2009-2018 / ) In this video tutorial we will see how to remove the rear door panel of a Chevrolet Spark. First of all, we open the rear door and unscrew the fixing
How to remove the door panel of the Chevrolet Spark?
Chevrolet Spark (2009-2016 / M300, MK 1) Let's discover the main and necessary instructions on how to disassemble and replace the rear door panel of the Chevrolet Spark. First, open the fron

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos