Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chrysler
    3. : Crossfire

Chrysler Crossfire - Videoguide

Chrysler Crossfire (2003-2007 / MK 1)
Guide to disassembling the front headlights of the Chrysler Crossfire.
In this video tutorial, we will see how to disassemble and replace the front headlights of the Chrysler Crossfire, following the instructions below. First, we …read all…
Posted on 26 May 2023 by ScegliAuto
Chrysler Crossfire (2003-2007 / MK 1)
How to remove the oil change warning light in Chrysler Crossfire?
In the Chrysler Crossfire, as well as in many other models, after changing the engine oil, the relative warning light must be removed manually. As we can see …read all…
Posted on 26 December 2022 by ScegliAuto
Chrysler Crossfire (2003-2007 / MK 1)
What is the Chrysler Crossfire fuse scheme?
In this video we can see where the fuse boxes are located, and the relative diagrams, in the Chrysler Crossfire, useful in case we need to check the fuse of a …read all…
Posted on 17 April 2024 by ScegliAuto
Chrysler Crossfire (2003-2007 / MK 1)
Chrysler Crossfire front headlight replacement
Open the hood and put on the special support rod. First you have to remove the front bumper, and to do this remove all the bolts and clips present in the two …read all…
Posted on 30 March 2024 by ScegliAuto
Chrysler Crossfire (2003-2007 / MK 1)
How do I remove the door lock from the Chrysler Crossfire?
In order to remove the door lock of the Chrysler Crossfire you must first remove the door panel and then remove the gasket along its side. In this way it will …read all…
Posted on 12 March 2024 by ScegliAuto
Chrysler Crossfire (2003-2007 / MK 1)
Replacing the cabin air filter
The pollen filter protects us from external agents that enter the passenger compartment, so it is important to replace it at regular intervals, every 10,000 …read all…
Posted on 24 July 2023 by ScegliAuto
Headlight (2) Cabin air filter (1) Engine oil (1) Fuse box (1) Lock (1)

See also:

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos