Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C4 Picasso
    4. : How do you replace the gearbox oil of the Citroën C4 Picasso?

Citroen C4 Picasso - Video tutorial

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Gear oil
Operation: How do you replace the gearbox oil of the Citroën C4 Picasso?

In order to replace the gearbox oil of the Citroën C4 Picasso, you need to access the underside of the car by loosening the screws that secure the vehicle's engine protection plate. Once this has been removed, you can loosen the drain plug of the oil tank and collect the used oil in a properly positioned container. After all the oil has drained out, you can close the drain plug and proceed to top up the oil. This can be done by opening the hood and pouring the oil through the corresponding vent located in the engine compartment.


Posted on 6 December 2023 by ScegliAuto



Changing the gearbox oil on the Citroen C4 Grand Picasso MK2
Citroen C4 Picasso (2013-2022 / MK 2) Let's see in this video how to remove and replace the gearbox oil on the second generation Citroen C4 Grand Picasso, following these simple steps. Fi
How do you replace the clutch of the Citroën C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) In order to replace the clutch of the Citroën C4 Picasso, it is necessary to lift the car so that the front wheels can be completely removed: once th
How to program and reset the gearbox of the Citroen C4 Picasso.
Citroen C4 Picasso (2006-2013 / MK 1) Today's guide will show us the necessary steps to program or reset the gearbox control unit of the Citroen C4 Picasso, as well as other models from t

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos