Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : Replacement of glow plugs for Citroen C3 1.4 HDI.

Citroen C3 - Video tutorial

Model: Citroen C3 SC - Years 2009-2016
Part: Glow plugs
Operation: Replacement of glow plugs for Citroen C3 1.4 HDI.

Today we will see the main instructions useful for disassembling and replacing the glow plugs of the Citroen C3 1.4 HDI. First, we open the engine hood of the car and start disassembling and removing the cover of the air filter box, unscrewing the fixing screws; then we disconnect the connectors of the glow plugs that we find behind the engine block, using a socket wrench with an extension to loosen and remove them, as shown in the video. At this point, we install the new glow plugs, of the right type, screwing them in by hand and then gently tightening, following the video tutorial until the end!


Posted on 24 December 2023 by ScegliAuto



Citroen C3 1.4 HDi glow plug replacement
Citroen C3 (2002-2009 / FN, FC) In today's video tutorial we will see how to remove and replace the engine glow plugs on a Citroen C3 1.4 HDi, but also on all the other models of th
Replacement of the battery of the Citroen C3 1.4 HDI
Citroen C3 (2009-2016 / SC) Let's see in this short and simple guide how to remove and replace the battery of the Citroen C3, with 1.4 HDI engine. First we open the engine hood
Replacement of the temperature sensor on the Citroen C3 1.4 HDI
Citroen C3 (2002-2009 / FN, FC) Let's find out the steps necessary to remove and replace the coolant temperature sensor on Citroen C3 first series, with 1.4 HDI engine. First of all

Other guides that may interest you

    Frequently Asked Questions

    • C3 2009-2016 - What does the orange light with a spiral mean in the Citroen C3? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos