Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C8
    4. : How to replace the mass/air sensor of the Citroen C8.

Citroen C8 - Video tutorial

Model: Citroen C8 MK 1 - Years 2002-2014
Part: Mass air flow sensor
Operation: How to replace the mass/air sensor of the Citroen C8.

Below we will see the instructions that will allow us to disassemble and replace the mass/air sensor of the Citroen C8, following these simple steps. First, we open the engine hood and start locating our mass/air sensor or airflow meter, located between the intake manifold and the air filter box; then we disconnect its electrical connector to remove it, as shown in the video. At this point, we replace and install the new mass/air sensor, as well as the original one; we make the connection and start the engine, following the video tutorial until the end!


Posted on 14 January 2024 by ScegliAuto



Where are the fuses located in the Citroën C8?
Citroen C8 (2002-2014 / MK 1) On the Citroën C8, all the fuses are contained within the appropriate fuse boxes that are installed on the vehicle: in this type of car, it is possib
Replacing the pollen filter on Citroen C8
Citroen C8 (2002-2014 / MK 1) Removing the pollen air filter on C8? We disassemble the filter and replace it with a new one. We open and lift the engine hood, unscrew the fastenin
Where is the fuse box of the Citroen C8 located?
Citroen C8 (2002-2014 / MK 1) If you need to intervene on one or more fuses of your Citroen C8 but don't know where the box containing them is located, then all you have to do is

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos