Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara Picasso
    4. : Replacement of the air conditioning control bulbs of the Citroen Xsara Picasso.

Citroen Xsara Picasso - Video tutorial

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Dashboard light
Operation: Replacement of the air conditioning control bulbs of the Citroen Xsara Picasso.

Today's guide will show us how to disassemble and replace the bulbs of the air conditioning controls in the Citroen Xsara Picasso, following the instructions below. First, we get into the car and start by removing the gear shift cover; then we unscrew the screws at the back, in order to later remove the car radio and then the automatic air conditioning controls (disconnecting the electrical wiring at the back), as shown in the video. At this point, we remove the small light bulbs and replace them with new ones, and then reassemble everything!


Posted on 13 February 2024 by ScegliAuto



How to change the air conditioning bulbs on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) How to change the bulbs or the LEDs of the air conditioning knobs on a Citroen Xsara Picasso? Let's see in this video how to proceed. We remove the c
Replacement headlight bulbs on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Are the Xsara Picasso headlight bulbs burned out and therefore need to be replaced? Let's see how they disassemble. We open the front hood by pulling
How do you replace the bulbs in the center panel of the Citroà «n Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) In order to replace the bulbs in the central panel of the Citroà «n Xsara Picasso, you have to remove the side panels of the radio, unscrewing the sc

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos