Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara Picasso
    4. : Replacement of the coolant temperature sensor of the Citroen Xsara Picasso.

Citroen Xsara Picasso - Video tutorial

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Coolant temperature sensor
Operation: Replacement of the coolant temperature sensor of the Citroen Xsara Picasso.

Today's main instructions will show us how to disassemble and replace the engine coolant temperature sensor of the Citroen Xsara Picasso. First, we open the hood and locate the temperature sensor; then we disconnect the coolant pipe and drain the fluid into a container for about ten minutes, as shown in the video. Next, we disconnect the electrical connector and unscrew the temperature sensor, replacing it with the new original one, following the reverse procedure of disassembly.


Posted on 17 February 2024 by ScegliAuto



How to replace the temperature sensor of a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In order to do this, I recommend that you first of all empty the cooling system. Before we can start, we will have to go and open the front hood of o
How to replace radiator fluid on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Top up with coolant? How to do it? We see the refilling on a Citroen Xsara Picasso. We unlock the front hood, lift the front hood and put it in safet
Replacement headlight bulbs on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Are the Xsara Picasso headlight bulbs burned out and therefore need to be replaced? Let's see how they disassemble. We open the front hood by pulling

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos