Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Berlingo
    4. : How do you replace the alternator of the Citroën Berlingo?

Citroen Berlingo - Video tutorial

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Alternator
Operation: How do you replace the alternator of the Citroën Berlingo?

To replace the alternator of the Citroën Berlingo, you need to access the bottom of the engine compartment: in particular, you will need to loosen the screws that secure the right front wheel to its housing, removing it along with the corresponding wheel arch. Once these parts have been removed, it will be possible to unscrew the screws that secure the alternator to its supports, also loosening the nut of its pulley: the V-belt can thus be removed from its seat, inserting the new one and then reassembling all the components previously removed.


Posted on 8 April 2024 by ScegliAuto



How do you replace the alternator of the Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) In order to replace the alternator of the Citroën Berlingo, you need to lift the vehicle so that the corresponding front wheel is not in contact with
How to remove the alternator on Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Let's see how to remove the alternator present on a Citroen Berlingo. We pull the bar located at the bottom left of the dashboard and lift the bonnet
When and how to change the timing belt of the Citroen Berlingo.
Citroen Berlingo (2008-2018 / MK 2) Below we will see the information that will illustrate when and how to replace the transmission belt of the Citroen Berlingo; in the case of the 1.6

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos