Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Berlingo
    4. : How to replace the wipers on the Citroen Berlingo?

Citroen Berlingo - Video tutorial

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Windscreen wipers
Operation: How to replace the wipers on the Citroen Berlingo?

In this tutorial we can see how to replace the front windshield wipers in the Citroen Berlingo, a very simple and quick operation. First of all, make sure that the windshield wipers are in the resting position, otherwise activate them and stop them as soon as they reach it, then lift the windshield wiper itself and locate the indicated button. Press and hold the button, then pull the brush outwards and separate it from the arm. Finally, place the replacement, press it firmly and attach it to the appropriate support. Repeat the operation for the opposite side, if necessary.


Posted on 1 May 2024 by ScegliAuto



Where are the fuses located in the Citroën Berlingo?
Citroen Berlingo (2018-2024 / MK 3) On the Citroën Berlingo, all fuses are contained inside fuse boxes that are installed on the vehicle: on this type of vehicle, it is possible to iden
Where are the fuses located in the Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) Each fuse of the Citroën Berlingo is located inside one of the appropriate fuse boxes that are present on the vehicle: in this category of vehicle, t
How to remove the exterior mirror of a Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Before we can start, we will have to go and open the front door of our Citroen Berlingo. So let's start by disengaging and removing the internal cove

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos