Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Ds3
    4. : How to replace the rear headlight bulb of the Citroen DS3

Citroen Ds3 - Video tutorial

Model: Citroen Ds3 MK 1 - Years 2010-2019
Part: Rear light bulb
Operation: How to replace the rear headlight bulb of the Citroen DS3

Today we will see the steps that will allow us to disassemble and replace the stop light bulb or the entire tail light of the Citroen DS3. First of all, we open the rear hatch of the trunk and start removing the side plastic cover; then we unscrew the headlight fixing screw and disconnect the power connector, as shown in the video. At this point, we separate the bulb holder from the light fixture, removing and replacing any faulty bulbs with new ones; finally, we reassemble the rear light, making the electrical connection and checking its operation!


Posted on 16 May 2024 by ScegliAuto



How do you replace the headlight bulb on your Citroën DS3?
Citroen Ds3 (2010-2019 / MK 1) Replacing the headlight bulb on the Citroën DS3 is done by opening the bonnet so that you have access to the rear part of the headlight corresponding
How do I replace the headlight bulb on the Citroà «n DS3?
Citroen Ds3 (2010-2019 / MK 1) In order to replace the Citroà «n DS3 headlight bulb, you need to open the hood and access the rear part of the headlight, where there is a circular
Replacement of the front headlight bulbs of the Citroen DS3.
Citroen Ds3 (2010-2019 / MK 1) When the front headlight bulb of the Citroen DS3 burns out, we must replace it as soon as possible. We open the hood of the engine compartment, posit

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos