Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C5
    4. : How to replace the headlight bulb of a Citroen C5?

Citroen C5 - Video tutorial

Model: Citroen C5 MK 2, X7, RD - Years 2008-2017
Part: Headlight bulb
Operation: How to replace the headlight bulb of a Citroen C5?

To replace the headlight bulb of a Citroen C5, start by turning off the engine and opening the hood. Locate the back of the headlight that contains the bulb to be replaced. Disconnect the electrical connector of the bulb by gently pulling it. Remove the headlight cover, which is usually secured with clips or screws. Once the cover is removed, you will find the bulb held in place by a spring or a clip. Release the spring or clip to free the bulb. Remove the old bulb from its housing and replace it with a new one, making sure not to touch the glass of the new bulb with your fingers, as oil residues can damage it. Insert the new bulb into the housing, reattach the spring or clip to secure it, and reconnect the electrical connector. Reposition the headlight cover and make sure it is securely in place. Finally, close the hood and turn on the headlights to verify that the new bulb is functioning correctly.


Posted on 18 May 2024 by ScegliAuto



How to replace the position lights of the Citroen C5
Citroen C5 (2008-2017 / MK 2, X7, RD) The following instructions will help us to disassemble and replace the headlight bulb of the Citroen C5, in simple and quick steps. First, we open th
How to install LED bulbs in the front headlight of a Citroen C5 X7.
Citroen C5 (2008-2017 / MK 2, X7, RD) In this video tutorial, we can see how it is possible to install LED bulbs in the front headlight of a Citroen C5 X7. The first thing to do is to pur
How to replace the headlight bulbs on a Citroen C5
Citroen C5 (2008-2017 / MK 2, X7, RD) Let's see how to replace the headlight bulbs on a Citroen C5. We open the bonnet by pulling the lever located at the bottom right of the dashboard (i

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos