Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. C3
  6. : How to replace the fuel pump in the Citroen C3?

Citroen C3 - Video tutorial

Model: Citroen C3 SC - Years 2009-2016
Part: Fuel pump
Operation: How to replace the fuel pump in the Citroen C3?

In this tutorial we can see how to replace the fuel pump in the Citroen C3, a very simple and quick operation. First of all, make sure the key is not inserted, then open the left rear door, grab the seat of the sofa and remove it. Then locate the plastic cap on the left side, open it and disconnect both the power connector and the two fuel hoses. At this point, all that remains is to unscrew the large outer ring, remove the pump, insert the replacement and reassemble everything following the reverse procedure.


Posted on 19 May 2024 by ScegliAuto



How to disassemble the fuel pump of the Citroen C3
Citroen C3 (2002-2009 / FN, FC) Let's find out in this guide how to disassemble and test the fuel pump of the Citroen C3, following the instructions below. First of all, let's get o
Replacement fuel pump on Citroen C3 Pluriel
Citroen C3 (2002-2009 / FN, FC) Replacing the fuel pump on a Peugeot 206? Let's see how it disassembles from inside the tank. We remove the rear seats of the car. We disconnect the
Replacing the fuel pump on Citroen C3
Citroen C3 (2002-2009 / FN, FC) Is the fuel pump in our car damaged? Let's see the disassembly of the pump from inside the tank of the C3. We disconnect the battery cables for safet

Other guides that may interest you

    Frequently Asked Questions

    • C3 2002-2009 - How much does it cost to replace the fuel pump on a Citroen C3? Read Answer
    • C3 2002-2009 - Where is the Citroà «n C3 diesel pump located? Read Answer
    • C3 2009-2016 - Where is the Citroen C3 fuel pump located? Read Answer
    • C3 2002-2009 - How many km to replace the diesel pump of the Citroen C3 1.4 HDi 70 Hp? Read Answer
    • C3 2002-2009 - Where is the Citroen C3 petrol float located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos