Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cupra
    3. :
  3. Formentor
    4. : How to remove the door panel on the Cupra Formentor

Cupra Formentor - Video tutorial

Model: Cupra Formentor MK 1 - Years 2020-2024
Part: Door panel
Operation: How to remove the door panel on the Cupra Formentor

Today we will explain how to remove the door panel of the Cupra Formentor and install a LED strip inside. We start by removing the panel by removing the central part of the inner handle. We also remove the silver ring and remove the handle by inserting a plastic lever inside. Once removed, we extract the window switch panel and then unscrew the bottom screws and then the side screws. Remove the panel and disconnect the connector. Now we insert the LED strip by connecting it to the internal cables already present near the window switch. Once the LED installation is complete, reassemble the panel by following the process in reverse.


Posted on 15 May 2024 by ScegliAuto



How to use the Kessy function on the Cupra Formentor
Cupra Formentor (2020-2024 / MK 1) In this video we can see how to use the Kessy system, that is Keyless access, of the Cupra Formentor. It is a keyless entry and start system with whi
How to replace the remote control battery of the Cupra Formentor?
Cupra Formentor In this tutorial we can see how to replace the remote control battery of the Cupra Formentor, a very simple and fast operation. To do this, we will o
How to remove the internal panel of a Cupra Formentor
Cupra Formentor To disassemble the internal panel of a Formentor Cupra, we must lift the lid where the window lifter button is located, remove the ring in two halves

Other guides that may interest you

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos