Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Sandero
    4. : Removing the door lock Dacia Sandero

Dacia Sandero - Video tutorial

Model: Dacia Sandero BS - Years 2008-2012
Part: Lock
Operation: Removing the door lock Dacia Sandero

In this video tutorial we will see the instructions to be able to remove the front door lock of a first series Dacia Sandero, following these simple instructions. First of all we open the door and we go to disassemble the door panel, unscrewing all the screws on the panel and removing the plastic covers; then disconnect the cable from the handle on the back and disconnect the various electrical connectors. At this point we are going to unscrew the side screws of the door lock, using a torx screwdriver and extract it, replacing it with the new one!


Posted on 2 January 2024 by ScegliAuto



How to lock the rear doors of the Renault Dacia Sandero
Dacia Sandero (2012-2020 / B8) As shown in the video, locking the rear doors of a Dacia Sandero is very simple. Rear door locking may be necessary when you have small children who
How to remove the door panel of a Dacia Sandero?
Dacia Sandero (2012-2020 / B8) Before starting, we will have to open the door of our Dacia Sandero. So let's start by disengaging and removing the window lifter lever, simply by ex
How to remove the door panel of a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Before we can start, we will have to go and open the door of our Dacia Sandero. So let's start by disengaging and removing the window lifter lever, s

Other guides that may interest you

    Frequently Asked Questions

    • Sandero 2012-2020 - Why does the central locking of the Dacia Sandero no longer work? Read Answer
    • Sandero 2012-2020 - How much does the ignition lock on my Dacia Sandero cost? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos