Do it yourself
| ||||
|
Dacia Duster - Video tutorial
Model: Dacia Duster
MK 2, HM
- Years 2017-2024 The AdBlue warning light on the Dacia Duster appears on the instrument panel when the additional fluid level inside the special tank is low and it is necessary to top up. To do this, you will need to open the fuel flap and unscrew the cap next to that of the fuel tank. Then it will be possible to put the additional liquid inside the tank, until it is completely filled. In this way, it will be possible to verify that the AdBlue warning light has disappeared from the instrument panel: if the warning light stays on, it is likely that the sensor does not detect the liquid as this has a low concentration of urea.
Posted on 24 April 2024 by ScegliAuto
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |