Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Sandero
    4. : How to change the internal bulbs of the Dacia Sandero from halogen to LED

Dacia Sandero - Video tutorial

Model: Dacia Sandero MK 3 - Years 2021-2024
Part: Light bulb
Operation: How to change the internal bulbs of the Dacia Sandero from halogen to LED

In this video we can see how to change the interior lights (cabin and trunk) of a Dacia Sandero, from halogen to LED: we can easily get LED bulbs, either in a physical store or online. We disconnect the light fixture from the car ceiling, using a small screwdriver, then inside we will find the plastic plate that contains the bulb: we disconnect the electrical connector and remove the halogen bulb in the center, replacing it with one of the LED bulbs we have obtained, we put the plate back in place and then the light fixture. Now we move on to the trunk light, where we will repeat the operation in the same way; usually LED bulbs have a mounting direction to pay attention to. We put them back in their housing and enjoy the beautiful white light.


Posted on 10 May 2024 by ScegliAuto



How to install led indicator lights in a 2021 Dacia Sandero
Dacia Sandero (2021-2024 / MK 3) In this video tutorial we can see how it is possible to install the LED lights of the indicators in a 2021 Dacia Sandero, following a few simple step
How to install led fog lights in a Dacia Sandero
Dacia Sandero (2021-2024 / MK 3) In this video tutorial we can see how it is possible to install led fog lights in a Dacia Sandero by following a few simple steps: the first thing to
How to remove the door panel of a Dacia Sandero?
Dacia Sandero (2012-2020 / B8) Before starting, we will have to open the door of our Dacia Sandero. So let's start by disengaging and removing the window lifter lever, simply by ex

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos