Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Sandero
    4. : Battery replacement for Dacia Sandero B8

Dacia Sandero - Video tutorial

Model: Dacia Sandero B8 - Years 2012-2020
Part: Battery
Operation: Battery replacement for Dacia Sandero B8

In this video, we see how to replace the battery of the Dacia Sandero. We need to open the hood of the engine compartment, and here we will find the battery on the driver's side near the front; we remove the cables from the negative terminal and remove the clamp, we repeat the same operation also with the positive terminal. Using a socket wrench with an extension, we unscrew the bracket at the base of the battery, remove the vapor vent tube and remove the battery. Clean the housing and position the new battery, secure it with the mounting bracket, insert the vent tube and reassemble the clamps and cables starting from those of the positive terminal.


Posted on 15 May 2024 by ScegliAuto



How to replace the key battery of a Dacia Sandero
Dacia Sandero (2008-2012 / BS) Let's start by disengaging the rear key cover of our Dacia Sandero, using a medium-sized slotted screwdriver to pry. Once we have removed the back co
How do you replace the battery on your Dacia Sandero?
Dacia Sandero (2008-2012 / BS) The battery of the Dacia Sandero is replaced by opening the bonnet and accessing the engine compartment: the battery will be found inside, in corresp
How do you replace the battery on the Dacia Sandero?
Dacia Sandero (2012-2020 / B8) In order to replace the battery of the Dacia Sandero, the hood must be opened to access the engine compartment: the battery will be located in corres

    Frequently Asked Questions

    • Sandero 2021-2028 - Why did the battery light come on in the Dacia Sandero Stepway? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos