Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Daihatsu
  4. :
  5. Terios
  6. : How to replace the cabin filter in a Daihatsu Terios?

Daihatsu Terios - Video tutorial

Model: Daihatsu Terios F700, J200, MK 2 - Years 2006-2017
Part: Cabin air filter
Operation: How to replace the cabin filter in a Daihatsu Terios?

In this tutorial, we can see how to replace the cabin filter in a Daihatsu Terios, which is a very simple and quick operation. We start by positioning ourselves on the passenger seat, then we open the compartment drawer and remove it from the dashboard by pressing both walls inward. Once we have done this, we locate the filter housing and, if it is being replaced for the first time, we cut along the entire front perimeter as shown in the video. At this point, we can insert the new filter and its cover, which must be purchased separately.


Posted on 13 May 2023 by ScegliAuto



Where is the cabin filter located in Daihatsu Terios and how to replace it?
Daihatsu Terios (2006-2017 / F700, J200, MK 2) In this tutorial we can see where the cabin filter is located in Daihatsu Terios and how to replace it, a very simple and fast operation. We start by
How to replace the cabin filter in the Daihatsu Terios?
Daihatsu Terios (2006-2017 / F700, J200, MK 2) In this tutorial we can see how to replace the cabin filter in the Daihatsu Terios. It is located behind the glove compartment on the passenger side,
Where is the fuel filter located in the Daihatsu Terios?
Daihatsu Terios (2017-2024 / MK 3, F800, F850) In this video, we can see where the fuel filter is located in the Daihatsu Terios, which is useful in case we need to replace it during regular maint

    Frequently Asked Questions

    • Terios 1997-2005 - Where is the Daihatsu Terios cabin air filter located? Read Answer
    • Terios 1997-2005 - Where is the Daihatsu Terios cabin air filter located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos