Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dodge
    3. :
  3. Journey
    4. : Cabin air filter replacement

Dodge Journey - Video tutorial

Model: Dodge Journey MK 1 - Years 2008-2020
Part: Cabin air filter
Operation: Cabin air filter replacement

The passenger compartment air filter is located on the passenger side, just behind the glove compartment; open the door of the glove compartment, press on the sides so that the rubber pegs that act as a limit stop are retracted and completely overturn the door itself; at this point it is possible to access the air conveyor, remove the filter seat cap and extract it; eliminate any residual dirt present in the filter seat and apply the new one (it is advisable to choose one with activated carbon) respecting the direction of the air flow; then apply the cap and replace the glove compartment door.


Posted on 25 August 2023 by ScegliAuto



How to change the cabin air filter of the Dodge Journey
Dodge Journey (2008-2020 / MK 1) The procedure for completing the replacement of the cabin air filter in your Dodge Journey (year 2009-2020) is identical to that already seen and use
How to replace the air filter on Dodge Journey
Dodge Journey (2008-2020 / MK 1) Does the Journey's air filter need to be changed? Let's see the disassembly of the pieces. Pull up the engine compartment opening lever located at th
How to remove the air filter on Dodge Journey
Dodge Journey (2008-2020 / MK 1) Let's see in this video how to remove the air filter on Dodge Journey: open the car door, pull up the engine compartment opening lever located at the

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos