Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dodge
    3. :
  3. Journey
    4. : How to replace the engine oil and oil filter of the Dodge Journey

Dodge Journey - Video tutorial

Model: Dodge Journey MK 1 - Years 2008-2020
Part: Engine oil
Operation: How to replace the engine oil and oil filter of the Dodge Journey

These simple steps will show us how to perform the routine maintenance check, replacing the engine oil and oil filter, of the Dodge Journey, but also of the Fiat Freemont. First, lift the vehicle and start loosening the oil drain plug found under the engine, letting it drain into a container for about ten minutes; then open the engine hood and unscrew the oil filter using a socket wrench with extension, replacing the cartridge with a new one, as shown in the video. At this point, all that's left is to pour in the new engine oil!


Posted on 11 May 2024 by ScegliAuto



Dodge Journey oil replacement
Dodge Journey (2008-2020 / MK 1) Replacing the used oil on a Dodge Journey, let's see how to remove the filter too. We lift the car on a column bridge and unscrew the pin of the oil
How to replace the right engine mount in the Dodge Journey?
Dodge Journey (2008-2020 / MK 1) In this tutorial, we can see how to replace the right engine mount in the Dodge Journey, a simple operation but one that requires a lot of attention.
How to reset the oil service in the Dodge Journey?
Dodge Journey (2008-2020 / MK 1) Resetting the oil service in the Dodge Journey, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we mus

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos