Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. DR
    3. :
  3. 5
    4. : How to change the motor oil on a DR5

DR 5 - Video tutorial

Model: DR 5 MK 1 - Years 2007-2022
Part: Engine oil
Operation: How to change the motor oil on a DR5

In this video we see how to change the oil on a DR5: we will need a complete oil filter with gasket and 4.5 liters of synthetic oil SAE 5W40 or 10W40. We will also need a container to drain the old oil, in order to dispose of it properly at an authorized center; then with a 17mm socket wrench, we will unscrew the oil pan plug. Let's not forget that it is also advisable to replace this component (including the gasket), to avoid leaks or drips later on. Now let's remove the oil filter, a task we do from under the hood. We will need a 27mm socket with an extension rod. Remove the filter and the old gasket from the plug and proceed to change the filter and gasket, lubricating it with some new oil. Also, put the new plug with its gasket on the oil pan. Now we can add the new oil. Let the engine idle for a few minutes and check the oil level again. We can then replace the cover. Task completed.


Posted on 19 February 2024 by ScegliAuto



How to disassemble the Dr5 radio and grease the heat knobs.
DR 5 (2007-2022 / MK 1) In this video you can see how it is possible to mount a 2 DIN Android car radio plus greasing of the heating knobs on a Dr5 car, following a few simp
How to reset the service warning light in the DR Evo 5
DR 5 (2007-2022 / MK 1) In today's video we see how to reset the service warning light in the DR5 Evo. First of all we remember the importance of carrying out the maintenanc

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos