Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. DS
    3. :
  3. DS 7
    4. : How to reset the service indicator of the Citroen DS7

DS DS 7 - Video tutorial

Model: DS DS 7 MK 1 - Years 2020-2024
Part: Instrument cluster
Operation: How to reset the service indicator of the Citroen DS7

In this video we can see how to deactivate the service light of a Citroen DS7: turn on the instrument panel without starting the engine and then press the button located on the top of the turn signal lever, which is on the left side of the steering wheel; a countdown will start and we must keep the button pressed until the count reaches zero on the screen. At this point the service key should disappear and we must turn off the instrument panel. The system will have been re-initialized at this point. We can verify by turning on the instrument panel again.


Posted on 20 April 2024 by ScegliAuto



How to reset the service on a Citroen DS7
DS DS 7 (2020-2024 / MK 1) Through today's video guide, we can see the entire process necessary to reset the maintenance light on a Citroen DS7. This operation should be perfor
How to reset the tire pressure sensor on Citroen DS7
DS DS 7 (2020-2024 / MK 1) To reset the tire pressure warning light on the Citroen DS7, you can follow these steps: Turn on the ignition without starting the engine. Press the
How to reset the tire pressure warning light in the Citroen DS7?
DS DS 7 (2020-2024 / MK 1) Resetting the tire pressure warning light in the Citroen DS7, as we can see in this tutorial, is an extremely simple and quick operation. Before proc

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos