Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. DS
  4. :
  5. DS 4
  6. : How do you reset the service light on a Citroen DS4?

DS DS 4 - Video tutorial

Model: DS DS 4 MK 1 - Years 2011-2018
Part: Checks and maintenance
Operation: How do you reset the service light on a Citroen DS4?

We changed the motor oil in our Citroen DS4 but the service light is still on in the instrument panel, well, in this very short tutorial we are shown the entire procedure necessary to reset this light. Let's start by pressing and holding the "ODO" button on the right side of the speedometer and turning on the car's ignition without starting the engine. At this point, we will see a countdown of ten seconds appear on the information display, so we continue to hold down the "ODO" button until the time runs out to complete the reset.


Posted on 5 May 2024 by ScegliAuto



How to reset the service light on the Citroen DS4?
DS DS 4 (2011-2018 / MK 1) Performing a service warning light reset on the Citroen DS4 is a very simple operation that can be done independently. To perform the reset, we need
Reset the service warning light on Citroen DS4
DS DS 4 (2011-2018 / MK 1) At the end of a certain number of time or kilometers, all cars need to take a service (or Service) and the car will signal this with a warning light
How to reset the service on the Citroen DS4?
DS DS 4 (2011-2018 / MK 1) In this tutorial, we can see how to reset the service in the Citroen DS4, an extremely simple and quick operation. Before proceeding, we must have co

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos