Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Enfield
    3. :
  3. Meteor 350
    4. : How to adjust the valves of the Royal Enfield Meteor 350

Model: Enfield Meteor 350
Part: Checks and maintenance
How to adjust the valves of the Royal Enfield Meteor 350

In this guide, we will see how to adjust the valve clearance of the Royal Enfield Meteor 350 motorcycle, as well as the Classic 350. First, we put the motorcycle on the center stand and start by removing the rider's seat; then we remove the fuel tank, unscrewing all the fixing screws, as shown in the video. At this point, we unscrew the screws of the cylinder head cover, then remove the spark plug; we remove the transmission case cover to access the engine's distribution, adjusting the valve clearance as per the manual!


Posted on 10 April 2024 by ScegliAuto



Royal Enfield Meteor 350 clutch cable replacement
Meteor 350 We see in this guide the instructions that will allow us to disassemble and replace the clutch cable of the Royal Enfield Meteor 350 motorcycle. Firs
How do i replace the battery of the Royal Enfield Meteor 350?
Meteor 350 In order to replace the battery of the Royal Enfield Meteor 350 it is necessary to loosen the screws that secure the crankcase cover positioned on th
How do you replace the levers of the Royal Enfield Meteor 350?
Meteor 350 In order to replace the levers of the Royal Enfield Meteor 350, you need to loosen the nuts located at the pins that secure the brake and clutch leve

How to remove the stator of the Peugeot Speedfight 2

Today we will see, in this video tutorial, how to disassemble and replace the stator of the Peugeot Speedfight 2 scooter, following these simple steps. In this case, the disassembly operation is carried out with the engine removed from the bodywork; then, once the rotor has been removed, we can go and unscrew the fixing screws of the stator, in order to remove it from the engine casing together with the electrical wiring, as shown in the video. At this point we are going to replace the component with the new one, with the original spare part; we install the stator in the correct direction, finally adjusting the advance.

Watch the video!


by ScegliAuto

More videos