Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Enfield
    3. :
  3. Classic 350
    4. : How do you set the clock on the Royal Enfield Classic 350?

Model: Enfield Classic 350
Part: Checks and maintenance
How do you set the clock on the Royal Enfield Classic 350?

In order to set the clock of the Royal Enfield Classic 350, you need to turn on the instrument panel by turning the key and then press the button "i" repeatedly until the clock is displayed. At this point, you need to hold down the button "i" for a few seconds until the hours start flashing. Once this happens, you can modify them by pressing the same button repeatedly; then you need to hold down the button "i" for a few seconds until the minutes start flashing, and then modify them in the same way.


Posted on 13 April 2024 by ScegliAuto



Where are the fuses located for the Royal Enfield Classic 350?
Classic 350 In the following guide dedicated to all of you owners of a Royal Enfield Classic 350, we will discover together where all the various fuses are locat
How do you replace the battery of the Royal Enfield Classic 350?
Classic 350 The battery replacement on the Royal Enfield Classic 350 is done by removing the cover located on the left side of the motorcycle, immediately under
How do you replace the battery of the Royal Enfield Classic 350?
Classic 350 The battery replacement operation on the Royal Enfield Classic 350 is carried out by opening the casing located on the right side of the motorcycle,

How do you replace the headlight bulb of the Triumph Daytona 675R?

In order to replace the headlight bulb of the Triumph Daytona 675R, you need to loosen the screws that secure the appropriate protective panels inside the bulbs: these will be immediately below the handlebars, on the sides of the front fork. Once these covering panels have been removed, it will be possible to disconnect the connector connected to the bulb, removing it from its housing; at this point, it will be possible to connect the new bulb to the connector, inserting it into the headlight and verifying that everything works correctly.

Watch the video!


by ScegliAuto

More videos