Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ferrari
    3. :
  3. 360
    4. : How do you replace the timing belt of the Ferrari 360?

Ferrari 360 - Video tutorial

Model: Ferrari 360 MK 1 - Years 1999-2004
Part: Timing belt
Operation: How do you replace the timing belt of the Ferrari 360?

In order to replace the timing belt of the Ferrari 360, you need to loosen the screws that hold the seats so that they can be removed from inside the cabin, providing access to their rear part. After the seats have been removed, it will be possible to detach the rear panel, under which the front part of the engine is located, where the belt is positioned. The belt can now be removed from the pulleys by loosening their central nut, particularly the tensioner roller. After the old belt has been removed, it will be possible to insert the new one, reinstalling the seats and the rear panel as well.


Posted on 29 June 2023 by ScegliAuto



Gear pump motor replacement
Ferrari 360 (1999-2004 / MK 1) Open the engine hood and carefully remove the protective cover on the right side of the engine. Locate the motor retaining screws and with a size 10
Replacement of the bushing in the gear selector and removal of the central tunnel
Ferrari 360 (1999-2004 / MK 1) Remove the gear lever knob by unscrewing it. Also remove the metal plate of the gear selector and the glove compartment of the cigarette lighter by d

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos