Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Punto
  6. : Guide for replacing the rear window on the Fiat Punto 2

Fiat Punto - Video tutorial

Model: Fiat Punto 188, MK 2 - Years 1999-2011
Part: Rear window
Operation: Guide for replacing the rear window on the Fiat Punto 2

In this guide we will see the main steps that we will need to remove and replace the rear window on the second generation Fiat Punto 188. First we open the rear door and start by removing the side uprights and the glass seal; then we lever the sides to remove the rear window (in the video it happens with the tailgate removed). At this point we are going to clean the side area of the rear window, in order to later apply the new sealant; we just have to reassemble the new rear window and the gasket, applying the reverse procedure.


Posted on 8 March 2024 by ScegliAuto



Replacement of the window switches of the Fiat Grande Punto - Punto Evo
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Let's see how to disassemble and replace the window lifter switch or the window button of the Fiat Grande Punto, but also of the Punto Evo, by follow
How to change the rear window mechanism on the Fiat Grande Punto?
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In today's video tutorial we will see how to remove the rear window lift mechanism on the Fiat Grande Punto, but also on the Punto Evo. First of all
Replacement rear window lifter on Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Replacing the window regulator on a Fiat Grande Punto? We remove the panel to access the window motor. We remove the crank of the manual window lift

    Frequently Asked Questions

    • Punto 2005-2018 - How much does it cost to replace the rear glass of a Fiat Grande Punto? Read Answer
    • Punto 2005-2018 - Why does the rear window no longer heat up in the Fiat Punto? Read Answer
    • Punto 2005-2018 - Where does the rear washer hose of the Fiat Grande Punto go? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos