Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Removal of the exhaust manifolds of the Fiat Punto

Fiat Punto - Video tutorial

Model: Fiat Punto 188, MK 2 - Years 1999-2011
Part: Muffler
Operation: Removal of the exhaust manifolds of the Fiat Punto

Let's see in this guide the main instructions that will allow us to disassemble and replace the exhaust manifolds of the Fiat Punto. First of all, we open the bonnet of our car and start unscrewing the fixing screws of the heat shield; then unscrew the five fixing screws of the exhaust manifold, using a 12 mm socket wrench, as shown in the video. At this point, remove the lower screws of the manifolds and disconnect the lambda probe or the oxygen sensor; we unscrew the screws of the collector, connected to the catalytic converter, to remove it and replace it with the new one!


Posted on 9 April 2023 by ScegliAuto



Replacement of fusion caps on Fiat Punto 188 1.2 (fire)
Fiat Punto (1999-2011 / 188, MK 2) In this video we will see the main steps to be able to remove and replace the engine fusion caps on the Fiat Punto 1.2 8 valve. First we open the bon
How to remove the Fiat Punto exhaust
Fiat Punto (1999-2011 / 188, MK 2) How to remove the exhaust pipe (muffler) on a Fiat Punto? Let's see in this video guide how to proceed: lift the car with a column bridge (jack), uns
How to clean the EGR valve of the Fiat Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) The EGR valve has the function of introducing a part of the exhaust gases back into the intake to create post combustion and therefore reduce emissio

    Frequently Asked Questions

    • Punto 1999-2011 - How much does it cost to replace the Fiat Punto muffler? Read Answer
    • Punto 1993-1999 - How to replace the muffler on the Fiat Punto? Read Answer
    • Punto 1999-2011 - How much does the Fiat Punto muffler cost? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos